10000W Original Chips Thyristor Super Power Electronic Regulator

high-power thyristor is used, because the current can reach 80 amps, which solves the overcurrent problem caused by the electric resistance of the electric furnace wire being too small in the case of cooling; the output voltage of the mains can be conveniently adjusted. Any adjustment between 0-100% (220 volts, 100-level adjustment, non-linear) for use by electrical appliances.
Such as: electric furnace, water heater heating, lighting dimming, small motor speed, electric iron temperature adjustment. Thereby achieving the effects of dimming, temperature regulation and pressure regulation. Large-scale electrical appliances that can be used with electric power of less than 10,000 watts are generally large enough to be used in general household appliances or small factories. (Inductive or capacitive load power should be reduced. This regulator is equipped with bidirectional high-power thyristor, which can be used without any components, which is very convenient and practical). Self-contained heat sink, thickened to increase the radiator. Buyers can get it with their hands, 10000W imported thyristor, ultra-high power, electronic digital regulator, dimming, speed regulation, temperature regulation.

• Use voltage: AC 220V
• Maximum power: 10000W resistive load limit power, room temperature is recommended for 5000W for a long time
• Voltage regulation: 0-100% (220 volts, 100-level adjustment, non-linear)
• It is suitable for water heater heat transfer, lighting dimming, small motor speed, electric iron thermostat
• It can be used in large appliances with an electric power of less than 10,000 watts.